Magnetic USB Rechargeable Ceiling Light with PIR Motion Sensor & Remote

Illuminate hard-to-wire areas without electrical modifications using this magnetic flush-mount ceiling light, equipped with a built-in 5000mAh polymer battery and fully controllable via handheld remote.

A precision PIR sensor delivers a 120-degree detection arc across 9.84–16.4 feet, triggering the 210-lumen output to cover up to 108 square feet. Choose between Constant On, Night Sensing, and Daytime Sensing modes, then set automatic shut-offs with five timer options (2, 15, 30, 60, and 120 minutes) to conserve energy while maintaining safe visibility in corridors, pantries, and utility rooms.

Tailor ambient lighting with three color temperatures (3000K warm white, 4000K natural white, and 6000K cold white) combined with stepless dimming from 10% to 100% and fixed 10%, 50%, and 100% brightness levels. Sixty aligned LEDs provide uniform illumination, while a dedicated button on the fixture allows instant manual switching regardless of remote status.

Mount the lightweight ABS and acrylic unit in under five minutes. Secure the included iron backing plate to any dry, flat surface using two wall anchors or high-tack adhesive, then attach the light body magnetically for tool-free removal or relocation. A single six-hour Type-C charge yields approximately 600 minutes of continuous operation or up to 12 months of standard motion-activated use.

• Physical dimensions: 7.09 × 7.09 × 0.59 inches | Weight: 0.62 lbs
• Includes: remote with pre-installed CR2025 battery, 31 cm USB-C cable, mounting hardware, and instruction manual
• Input rating: 5V/1A | Power draw: 3W

For reliable signal transmission, switch the fixture to AUTO or ON mode before operating the remote. Complete the full six-hour initial charge cycle prior to first deployment to stabilize battery capacity.

Designed with 3 color temperatures, 4 brightness settings, 3 lighting modes and 5 timer settings, our magnetic flush ceiling light enables you to customize you light at will. The advanced PIR sensor allows for 9.84-16.4ft sensing distance.USB rechargeable and longlasting for 12 months' normal use. Dual control with remote and button makes your life more streamlined and convenient. Easy to install with magnet technology. Ideal for hallway, closet, living room, pantry, bathroom, stairway, basement, bedroom, porch, shed, wall and many more commercial or residential applications.

Feature:

• 3 Color Temperatures & Light Dimmable: Designed with 3 color temperatures(4000K Natural White/3000K Warm White/6000K Cold White), our magnetic flush ceiling light allows you to customize your light at will. You can also easily adjust the brightness freely(Stepless 10-100%/10%/50%/100%) via remote control, energy-saving and convenient.

• Motion Sensor Light with 3 Modes: With 3 lighting modes(Constant On Mode/Night Sensing Mode/Daytime Sensing Mode), our motion sensor ceiling light can fully satisfy your diverse lighting requirements in daily life. The embedded PIR sensor features 120 ° detection angle and 9.84-16.4ft sensing distance, providing you with a large lighting area of 107.64Square Feet.

• Long-lasting & USB Rechargeable: Built in a 5000mAh rechargeable battery, our wireless ceiling light can run up to 600 minutes for continuous lighting and sense 2000 times. After fully charged for 6 hours, it is capable of 12 months' normal use.

• Dual Control & 3 Timer Settings: You can adjust the light color and modes through the handheld remote control or via button switching on the ceiling light. Featured with 5 timer settings( 2/15/30/60/120 Minutes), our rechargeable ceiling light is able to avoid longtime lighting and offers a comfortable sleeping environment for you!

• Magnetic & Adhesive Installation: The battery operated ceiling light can be installed with magnet. Only you need to do is install the iron plate on the ceiling with screws or adhesive. The magnet part will be attracted to the iron sheet. Easy to remove and install. Ideal for hallway, closet, living room, pantry, bathroom, stairway, basement, bedroom, porch, shed, wall and many more commercial or residential applications. Make your life more streamlined!

Specification:

Product Type: Motion Sensor Ceiling Light
Material: ABS+Acrylic
Color: White
Inbuilt Battery: 1Pc 5000mAh Polymer Battery(Battery is not for individual sale)
Remote Control Battery: 1Pc CR2025 Battery(Included)
Power: 3W
Input: 5V/1A
Sensor: PIR Motion Sensor
Detection Angle: 120°
Sensing Distance: 3-5m/9.84-16.4ft
Delay Time: Around 30S
Light Source: 60 LED Beads
Lumen: 210 Lumen
3 Color Temperatures: 4000K Natural White, 3000K Warm White, 6000K Cold White
3 Modes: Constant On Mode, Night Sensing Mode, Daytime Sensing Mode
5 Timer Settings: 2/15/30/60/120 Minutes
4 Brightness Settings: 10-100% Stepless Dimming/10%/50%/100%
Lighting Area: 10Square Meter/107.64Square Feet
Runtime: 600Minutes(Constant On Mode, 100% Brightness)
Charging Time: 6-8Hrs
Installation Method: Magnetic Installation with Screws/Adhesive
Operation: Button Control + Remote Control
Charging Cable Length: 31cm/12.2in
Item Size: 18x18x1.5cm/7.09x7.09x0.59in
Item Weight: 279g/0.62 lbs
Package Size: 23x22x4cm/9.06×8.66×1.57in
Package Weight: 380g/0.84 lbs

Package Contents:

1x Motion Sensor Ceiling Light
1xIron Plate(On the back of the ceiling light)
1x Remote Control
1x Type-C USB Cable
2x Screws
2x Plastic Anchors
1x Adhesive
1x User Manual

Friendly Reminder:
• 1. Please turn on the light mode to AUTO/ON state on the ceiling light before using the remote control.
• 2. Please charge the ceiling light for at least 6 hours before first use. The indicator turns red when charging and green when fully charged.